language   
|
| 咨詢電話:021-66035190 E-mail:sales@shhfl.com |
| 工作時間：周一至周五 Am8:30-Pm17:30 |
|
language
|
| 咨詢電話:021-66035190 E-mail:sales@shhfl.com |
| 工作時間：周一至周五 Am8:30-Pm17:30 |
|
|
Quik-Stik II LDT -The Series 951 Quik-Stik II is a high accuracy, high-speed “rod style” non-contact linear transducer, available in stroke lengths up to 300". The Quik-Stik II is highly featured with a variety of analog, velocity and pulsed outputs. The Quik-Stik II can be programmed via a hand held programmer or a PC. The Quik-Stik II LDT, with its high resolution and industrial construction, is at home in areas such as assembly automation, material handling, robotics, and any other industrial area where highly accurate and reliable continuous linear position sensing is needed.
The 955LC BRIK is an accurate, programmable zero and span, non-contact
linear position sensor in an economical, low profile package. The BRIK
is a self-contained unit and does not have a can or head assembly. All
of the electronics are incorporated in the transducer which is less than
one inch tall. It is available in analog, digital, and quadrature
outputs. The 955LC BRIK is a self-contained unit and does not have a can
or head assembly. All of the electronics are incorporated in the
transducer which is less than one inch tall. Units can be ordered in
span lengths up to 180 inches long in 0.1 inch increments. The magnet
slide is designed to move effortlessly along the transducer in guide
tracks.
The 955DQ BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The 955DQ BRIK is an accurate, auto-tuning, non-contact linear displacement transducer in an economical, low profile package with direct quadrature output.
The 955CA BRIK Gen III is an accurate programmable, auto tuning,non-contact, linear displacement transducer in an economical, low profile package. The transducer utilizes our field proven magnetostrictive technology to give absolute position, repeatable to .006% of the programmable sensing distance. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The unit is designed to mount on top of a pneumatic cylinder and detect the movable magnet within the cylinder. It can be ordered with a 0-10 VDC or 4-20 mA output.
The 955A BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The BRIK can be ordered in span lengths up to 180 inches long in 0.1 inch increments. Applications include: Presses, blow molding, extrusion, roll positioning, dancer control and many more.
The 955S BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The 955S Smart BRIK is designed for applications where economical continuous feedback is necessary. The sensor can be a cost effective replacement to limit and proximity sensors and linear potentiometers. Applications include presses, blow molding, injection molding, extruding, roll positioning and many more
The 956 BLOK is an optional housing for the 955 Brik LDT. This housing
adds a chamber, magnet and piston. The streamlined anodized aluminum
extrusion houses the sensing element and electronics. The piston
assembly moves over the sensing element that determines the position and
converts it to a readable output. The BLOK is a self-contained unit
and does not have a can or a head assembly.
美國蓋姆科GEMCO 位移傳感器
The 955 eBrik? is an accurate, programmable zero and span, auto-tuning,
non-contact linear position sensor in an economical, low-profile
package. The sensor utilizes our field-proven Magnetostrictive
technology to provide absolute position, repeatable to .001% of the
sensing distance. The 955 eBrik? is a cost effective linear sensing
solution.
The series 925 Linear Cable Reel Sensor can be used in any linear application up to 1200 inches. The system consists of a heavy-duty spring motor assembly attached to a precision machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected to it. The shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions required by the chosen sensor. The Series 925 Linear Cable Reel Sensor can be used with our Series 1746 Resolver Input Card and a Series 2120 PLC Transducer Module.The 925 Cable Reel also provides accurate position feedback for linear motion up to 100 feet. Mounting for either resolver, encoder, cam switch or rotary potentiometer.
Mill Duty Housing -The Gemco 950MD Mill-Duty Housing is a stainless steel housing designed to protect LDTs in harsh or high temperature environments such as those found in heavy industrial plants and processes. In addition, it is also used where Nema 4 protection is required or where mounting limitations exist.
Intrinsically Safe LDT - The 950IS is an intrinsically safe analog
system. The system uses a remote transmitter mounted in a safe area
wired through intrinsically safe barriers to the LDT, which may be
mounted in a hazardous area. The term 'Intrinsically Safe' pertains to a
device's inability to produce an electrical spark of enough
significance to cause ignition. This system incorporates circuitry that
is U.L. listed for use in Class I, Groups C and D, Class II, Groups E, F
and G, and Class III hazardous locations.
GEMCO 953系列磁致伸縮位移傳感器是高精度和高分辨率傳感器,防護等級可達IP68可用于惡劣工業環境,其抗振動是30 Gs和抗沖擊性能的實驗室測試實驗室測試于1000 GS .具有自動增益電路和工廠校準零點.
誠信為本
客戶至上
精益求精
創造輝煌
上海歐逸機電工程設備有限公司版權所有． 嚴禁擅自轉載與使用． Copyright © 2004-2010 滬ICP備20004196號
